Landing Nipples & Lock Mandrels Lock mandrel with X profile Lock mandrel with XN profile Lock mandrel with R profile Lock mandrel with RN profile Landing Nipple with X profile Landing Nipple with XN profile Landing Nipple with R profile Landing Nipple with RN profile DESCRIPTION A-LNX, A-184 – Landing Nipple with X profile A-LMX, […]
Landing Nipples & Lock Mandrels Read More »
Mechanical Retrievable Bridge Plug DESCRIPTION A-MRBP, A-098 – Mechanical Retrievable Bridge Plug A-RTMRB, A-164 – Retrieving Tool for Mechanical Retrievable Bridge Plug The Mechanical Set Retrievable Bridge Plug is a high pressure plug for multiple zone and selective single zone operations such as acidizing, fracturing, cementing and testing. It features a large internal by-pass to
Mechanical Retrievable Bridge Plug Read More »
Wireline Retrievable Bridge Plug DESCRIPTION A-WLRBP, A-146 – Wireline Retrievable Bridge Plug A-PTWRBP, A-148 – Pulling Tool for Wireline Retrievable Bridge Plug The WLRBP is a short, compact retrievable Bridge Plug designed for quick runs and high-pressure applications. It features Bi-Directional Slips that hold pressure from above and below. The Slip Cage prevents the Slip
Wireline Retrievable Bridge Plug Read More »
Snap Latch Setting Tool DESCRIPTION A-SLST, A-048– Snap Latch Setting Tool The A-SLST is designed to allow for Cementing thru a Wireline or Mechanical Cement Retainer and to mechanically set the BP/CR. It features a Snap-in/Snap-Out sub that connects with the body of the BP/CR and a Stinger Sub (In case of Cement Retainers). The
Snap Latch Setting Tool Read More »
Wireline Adapter Kit DESCRIPTION A-WLAK, A-047– Wireline Adapter Kit The A-WLAK, Wireline Adapter Kit, is used in conjunction with Wireline Setting Equipment, like Packers, Bridge Plugs and Cement Retainers. It features an Adjustor Sub, Setting Sleeve and Tension Mandrel. The WLAK is compatible with the Wireline Pressure Setting Assembly and with the A-HST. When the
Wireline Adapter Kit Read More »
Drillable Cement Retainers DESCRIPTION A-PCR-M, W (Mechanical / Wireline set), A-046– Permanent Cement Retainer The A-PCR, Cement Retainers are designed for secondary squeeze cementing operations, incorporates a sliding valve mechanism.Both models feature a single piece packing element with full circle slips & back-up rings. All components are secured, making faster run-in possible and reducing chances
Mechanical / Wireline set Permanent Cement Retainer Read More »
Composite Bridge Plug DESCRIPTION A-CBP, A-199 – Composite Bridge Plug The A-CBP is made up of composite metallurgy with Aluminum body. The plug is designed with robust casting slips to hold the pressure of 15,000 Psi above and 10,000 Psi below. It isolates a formation for Fast Drill tubing operations in both single and multiple-zone
Composite Bridge Plug Read More »
Hydro- Mechanical Permanent Bridge Plug DESCRIPTION A-HMBP, A-132– Hydro- Mechanical Permanent Bridge Plug The A-HMBP is designed to be actuated Hydraulically by dropping a setting ball and set completely by mechanical manipulation, thereby eliminating the need of complex setting tools and adapters. The design allows for the Plug top be run on coiled tubing and
Hydro- Mechanical Permanent Bridge Plug Read More »
Mechanical / Wireline set Permanent Bridge Plug DESCRIPTION A-PBP-M, W (Mechanical / Wireline set), A-045– Permanent Bridge Plug The A-PBP, Bridge Plugs are designed for Zone Isolation, Well abandonment or Casing repair operations. Both models feature a single piece packing element with full circle slips & back-up rings. All components are secured, making faster run-ins
Mechanical / Wireline set Permanent Bridge Plug Read More »
Hydraulic Retrievable Packer-High Pressure DESCRIPTION A-HRPH, A-182 – Hydraulic Retrievable Packer-High Pressure The A-HRPH is a high pressure hydraulic set, double grip, retrievable packer. The A-HRPH does not require any mechanical manipulation of the production string to be set, making it optimal for situations where mechanical manipulation is not feasible. The Packer is run to
Hydraulic Retrievable Packer-High Pressure Read More »
CodePen – Firework Simulator v2 Happy Settings For more info, click any label. Shell Type Shell Size Quality Sky Lighting Scale Auto Fire Finale Mode Hide Controls Fullscreen Open Shutter Passionately built by Caleb Miller. Close
Wish you a very Happy Eid ! Read More »
Tie Back Seal Assembly DESCRIPTION A-TBSA, A-088 – Tie Back Seal Assembly Tie Back Seal Assembly is used to tie back an existing Liner to a location higher up in the wellbore, or to the surface. The Assembly features seals that are compatible with the Tie Back Receptacle and can be provided in lengths and
Tie Back Seal Assembly Read More »
Tie Back Isolation Packer DESCRIPTION A-TBP, A-090 – Tie Back Isolation Packer The Tie Back Isolation Packer is run on a second trip to isolate leaks at the liner top, withstand high differential pressures. The packer is installed after the liner has been run and cemented and the liner polished bore receptacle (PBR/TBR) seal bore has
Tie Back Isolation Packer Read More »
Kelly Drive Cementing Head DESCRIPTION A-KDCH, A-223 – Kelly Drive Cementing Head The Kelly Drive Cementing Head is designed specifically for cementing liners where manipulation of the string is required without having to break the Cementing Lines. The manifold consists of a swivel, plug drop assembly, ball drop assembly, plug indicator sub and a fluid
Kelly Drive Cementing Head Read More »
Ball Circulating Sub for Inner String DESCRIPTION A-284, A-BCAI – Ball Circulating Sub for Inner String The Ball Circulating Sub forms a part of the running string. It provides for a set against which pressure can be applied to activate pressure actuated components. The tool is equipped with a Shear Pinned Ball seat, that shears
Ball Circulating Sub for Inner String Read More »
Swab Cup Assembly DESCRIPTION A-SCA, A-202-Swab Cup Assembly The Swab Cup Assembly is particularly useful in applications where the liner does not require to be cemented, like slotted liner applications or running screens. Used in conjunction with a hydraulic Liner Hanger System. The Swab Cups provide an effective seal below the setting ports, thereby allowing
Junk Screen Sub DESCRIPTION A-JSS, A-016 – Junk Screen Sub Junk Screen Sub provides a barrier over the Tie-Back Receptacle. It acts as a cap over the TBR, which prevents debris and foreign material from entering the TBR that my hinder the operation of the Running Tools and prevents potential problems in tool retrieval due
Retrievable Pack Off-Bushing DESCRIPTION A-RPB, A-006 – Retrievable Pack Off-Bushing The A-RPB is run with Liner Hanger systems and provides a pressure barrier between the work string and the liner. It remains locked in its position throughout the running and cementing operations. It also allows the liner-top packers to be pressure tested after setting. The
Retrievable Pack Off-Bushing Read More »
Hydraulic Recessed Slip non-rotating Liner Hanger DESCRIPTION A-HNRI-2, A-331 – Hydraulic Recessed Slip non-rotating Liner Hanger w/ Integral LTP w/ Hold Down The A-HNRI-2 hydraulic set non-rotating liner hanger can be used where mechanical manipulation of the string is not possible and heavier liners need to be hanged. The Slips are designed for optimized load
Hydraulic Recessed Slip non-rotating Liner Hanger w/ Integral LTP w/ Hold Down Read More »
Expansion Joint Splined DESCRIPTION A-EJS, A-209 – Expansion Joint Splined The A-EJS is a combination tool that acts like a telescoping sub or a swivel sub. This is a reliable tool to compensate tubing expansion or contraction that occurs due to temperature changes during well operations, being typically used with retrievable packers. The design makes
Expansion Joint Splined Read More »