Our Products
AVENTUS offers Liner hangers for applications in Vertical, Low-Inclination and Horizontal wellbores. Both Mechanical Set and Hydraulic Set Liner Hangers are designed for durability, high hanging capacities and large bypass areas. Rotating Liner hangers are equipped with high capacity bearings to facilitate drill down and rotation during cementing
A production packer is a standard component of the completion hardware of oil or gas wells used to provide a seal between the outside of the production tubing and the inside of the casing, liner, or wellbore wall.
Based on their primary use, packers can be divided into two main categories: production packers and service packers. Production packers are those that remain in the well during well production. Service packers are used temporarily during well service activities such as cement squeezing, acidizing, fracturing and well testing.
A device used to seal a subterranean well of hydrocarbons at a downhole location; may have removable features. Also known as a frac plug.
aventus Oil Tools developed the bridge plug and cement retainer with their accessories. This tool is used for the isolation of wellbore. There are two types, either it will be a permanent type or retrievable type. aventus oil tools has Both type. It may be set mechanically or hydraulically. This tool is easily convertible in bridge plug to cement retainer and vise versa.
AVENTUS offers various sub surface flow control equipment. Non-elastomeric Sliding Sleeve runs on the production tubing intended to use to control the flow between the tubing and casing.
Available with optional X and R type landing nipple profile for landing of respective flow control devices e.g. lock mandrels, standing valves etc., would be used for different applications i.e. to test the tubing, shut off the well etc.
The B Shifting Tool is used to shift mechanically up or down to open or close based on types of sliding sleeves as per their application or customer requirement.
AVENTUS offers a wide range and variations of dependable Floating Equipment, for diversified applications in various geologies and operating condition requirements. Float Equipment are equipped with high compressive strength cement, different valve(s) and insert(s) as per their types with intended applications. Feature large valve diameter that allows higher flow rates for easy and faster displacement volume in cementing job. Easy drillable with all types of bits including PDC bits, thereby minimizing the drill-out time.
AVENTUS offers various Type of cementing head
Cement head is a device fitted to the top joint of a casing string to hold a cement plug before it is pumped down the casing during the cementing operation. In most operations, a bottom plug is launched before the spacer of cement slurry. The top plug is released form the cement head after the spacer fluid