Junk Basket for Debris DESCRIPTION A-JB, A-217 – Junk Basket for Debris The A-JB Junk/Boot basket provides an easy and effective way to trap heavy cuttings during milling operations. The cuttings will fall out of the drilling fluid into the boot due to a reduction in annular velocity when the drilling fluid circulates across a […]
Junk Basket for Debris Read More »
Expansion Joint Splined DESCRIPTION A-EJS, A-209 – Expansion Joint Splined The A-EJS is a combination tool that acts like a telescoping sub or a swivel sub. This is a reliable tool to compensate tubing expansion or contraction that occurs due to temperature changes during well operations, being typically used with retrievable packers. The design makes
Expansion Joint Splined Read More »
Pulling Tool for Retrievable Seal Bore Packer DESCRIPTION A-PTRSB, A-229 – Pulling Tool for Retrievable Seal Bore Packer The A-PTRSB is designed to retrieve the A-RSBP Seal Bore Packers from wellbores. The tool latches with the top of the packer and an upward force shears an inner sleeve, continued up-strain spaces out the external components,
Pulling Tool for Retrievable Seal Bore Packer Read More »
Hydraulic Setting Tool DESCRIPTION A-HST, A-153– Hydraulic Setting Tool The A-HST, Hydraulic Setting tool, is a Hydraulically actuated tool, that is used to set Packers, Bridge Plugs and Cement Retainers. The tool can be connected to a Wireline Adapter Kit, which can be used to set wireline equipment. It features multiple pistons, which can be
Hydraulic Setting Tool Read More »
On-Off Seal Assembly DESCRIPTION A-OOSA, A-093 – On-Off Seal Assembly The On-Off Seal Assembly is a Left hand release tubing disconnect device. It features internal landing nipple profiles (F, X, R) to lock flow control equipment. Also features premium seals that can hold high pressure differentials and allow for multiple connect and disconnect cycles. FEATURES
On-Off Seal Assembly Read More »
Rotating Reciprocating Casing Scrapper DESCRIPTION A-RRCS, A-154 – Rotating Reciprocating Casing Scrapper A-RRCS Casing Scraper is designed to remove foreign matter and built up namely cement sheath, imbeds, perforation burrs, rust, mill scale etc. on the inside of the casing wall, to prepare a smooth I.D. for running and setting Packers and other equipment. The
Rotating Reciprocating Casing Scrapper Read More »
Tubing Anchor Catcher DESCRIPTION A-TAC, A-355 – Tubing Anchor Catcher Tubing Anchor Catcher is mechanically actuated to anchor tubing string into the host casing. Acts as an anchor to the lower end of the tubing string to maintain tension in the tubing string and eliminates tubing movement during the pump cycle. The use of an
Tubing Anchor Catcher Read More »
Hydraulic Anchor Catcher DESCRIPTION A-HTCA, A-253 – Hydraulic Anchor Catcher The A-HTCA is a hydraulically activated retrievable anchor designed to hold the tubing / casing string in tension or compression. The Hydraulic Anchor catcher prevents movement of the tubing / casing during pumping strokes and holds it stationary if it should part. The use of
Hydraulic Anchor Catcher Read More »