Hydraulic Retrievable Packer-High Pressure DESCRIPTION A-OHP, A-269 – Hydraulic set Open Hole Packer The A-OPH is a hydraulic set, single string Open Hole Packer, particularly useful in multizone well stimulation operations. Tubing pressure is used to set the packer and the setting force is locked in by means of a lock ring. The Packing Element […]
Hydraulic set Open Hole Packer Read More »
Cut to Release Hydraulic Set Packer DESCRIPTION A-HRP9, A-438 – Cut to Release Hydraulic Set Packer This premium cut to release production packer is a hydraulically set, double grip retrievable packer for use in vertical and deviated wells. The standard version is suitable for high-pressure, high temperature environments, also available for low-temperature use in subsea
Cut to Release Hydraulic Set Packer Read More »
Hydraulic Retrievable Packer-Feed Thru DESCRIPTION A-HRP3-FT, A-248 – Hydraulic Retrievable Packer-Feed Thru The A-HRP3-FT packer is available either straight pull shear or cut to release configuration, with multiple control line bypass intended to be the uppermost packer in intelligent well completions where zonal isolation with line bypass is typically a requirement. The packer provides
Hydraulic Retrievable Packer-Feed Thru Read More »
Junk Basket for Debris DESCRIPTION A-JB, A-217 – Junk Basket for Debris The A-JB Junk/Boot basket provides an easy and effective way to trap heavy cuttings during milling operations. The cuttings will fall out of the drilling fluid into the boot due to a reduction in annular velocity when the drilling fluid circulates across a
Junk Basket for Debris Read More »
Hydraulic Retrievable Packer-High Pressure DESCRIPTION A-HRPH, A-182 – Hydraulic Retrievable Packer-High Pressure The A-HRPH is a high pressure hydraulic set, double grip, retrievable packer. The A-HRPH does not require any mechanical manipulation of the production string to be set, making it optimal for situations where mechanical manipulation is not feasible. The Packer is run to
Hydraulic Retrievable Packer-High Pressure Read More »
Expansion Joint Splined DESCRIPTION A-EJS, A-209 – Expansion Joint Splined The A-EJS is a combination tool that acts like a telescoping sub or a swivel sub. This is a reliable tool to compensate tubing expansion or contraction that occurs due to temperature changes during well operations, being typically used with retrievable packers. The design makes
Expansion Joint Splined Read More »
Pulling Tool for Retrievable Seal Bore Packer DESCRIPTION A-PTRSB, A-229 – Pulling Tool for Retrievable Seal Bore Packer The A-PTRSB is designed to retrieve the A-RSBP Seal Bore Packers from wellbores. The tool latches with the top of the packer and an upward force shears an inner sleeve, continued up-strain spaces out the external components,
Pulling Tool for Retrievable Seal Bore Packer Read More »
Hydraulic Setting Tool DESCRIPTION A-HST, A-153– Hydraulic Setting Tool The A-HST, Hydraulic Setting tool, is a Hydraulically actuated tool, that is used to set Packers, Bridge Plugs and Cement Retainers. The tool can be connected to a Wireline Adapter Kit, which can be used to set wireline equipment. It features multiple pistons, which can be
Hydraulic Setting Tool Read More »
Seal stacks Standard Seal Stacks made up of nitrile chevron seals and steel spacer rings. Bonded Seal Stack Two nitrile or Viton seals are bonded to each metal insert. These inserts are separated by steel spacers. Bonded seals should be used when seals cannot be prevented from moving out of the seal-bore while holding differential
Anchor Tubing Seal Assembly DESCRIPTION A-ATSA, A-195 – Anchor Tubing Seal Assembly The A-ATSA is designed to be used with the Seal Bore Packer. It features a ratch-latch Locking mechanism that withstand the forces caused due to pressure differentials. The ATSA can be released by right-hand rotation. Once the Seal Assembly is positioned in the
Anchor Tubing Seal Assembly Read More »
Locator Tuning Seal Assembly DESCRIPTION A-LTSA, A-196 – Locator Tuning Seal Assembly Locator Tubing Seal Assembly is used to tie back an existing production seal bore packer to a location higher up in the wellbore, or to the surface. The Assembly features seals that are compatible with the seal bore and can be provided in
Locator Tuning Seal Assembly Read More »
Mill Out Extension DESCRIPTION A-MOE, A-169 – Mill Out Extension The A-MOE, provides a means for extending the bore of a Seal Bore packer, so as to accommodate the Packer Milling Tool. A mill-out extension runs below a seal bore extension of seal bore packers. The mill-out extension catches sleeve of the packer milling
Mill Out Extension Read More »
Seal Bore Extension DESCRIPTION A-SBE, A-168 – Seal Bore Extension The A-SBE, A Seal Bore Extension is run to provide additional sealing bore when a long seal assembly is run to accommodate considerable tubing movement. The Seal Bore Extension has the same ID as the corresponding packer seal bore it is run with, thus all
Seal Bore Extension Read More »
Permanent Seal Bore Packer DESCRIPTION A-PSP, A-263 – Permanent Seal Bore Packer Permanent Seal Bole high-performance and versatile retainer production packers are considered industry standards among permanent production packers, designed to withstand high differential pressure while the seal assembly is latched into the packers. The packer run with the adapter kit (wireline/hydraulic) and wireline pressure
Permanent Seal Bore Packer Read More »
Hydraulic Set Permanent, Seal Bore Packer DESCRIPTION A-HPSP, A-193 – Hydraulic Set Permanent, Seal Bore Packer The A-HPSP Hydraulic Set Permanent Seal Bole Packer is a hydro-Set Retainer Production designed to withstand high full differential pressure while the seal assembly is latched into the packer. Packer runs and set on a single trip with the
Hydraulic Set Permanent, Seal Bore Packer Read More »
Permanent Hydraulic Set Isolation Packer DESCRIPTION A-PHIP, A-294 – Permanent Hydraulic Set Isolation Packer The A-PHIP Permanent Hydraulic Set Isolation Packer is a Retainer production packer designed to withstand high differential pressure, runs and set on a single trip with the completion tubing string and incorporates maximum strength, uniformity of setting pressure and standardization of
Permanent Hydraulic Set Isolation Packer Read More »
Storm Valve – Plug Type DESCRIPTION A-SV1, A-188 – Storm Valve – Plug Type The A-SV1 is run above a compression set packer and provides a means of disconnecting the drill pipe or tubing close to the surface without tripping the entire string. It is especially useful in cased where the rig must be abandoned
Storm Valve – Plug Type Read More »
Safety Joint for Squeeze Packers DESCRIPTION A-SJSP, A-101 –Safety Joint for Squeeze Packers The A-SJSP Safety Joint is a means for backing off a work string from tools below. Right-hand rotation and reciprocation are needed to back off the release mechanism. Shear screws hold the mandrel locked until a straight pull shears the screws. This
Safety Joint for Squeeze Packers Read More »
Unloader Sub used with Service Packers DESCRIPTION A-USSP, A-102 – Unloader Sub used with Service Packers The A-USSP is designed to be used in conjunction with Service Packers and to withstand high pressures and severe operating conditions. The unloader provides a means to equalize the tubing and annulus during retrieval of service packers, it also
Unloader Sub used with Service Packers Read More »
Retrievable Squeeze packer DESCRIPTION A-RSP, A-100 – Retrievable Squeeze packer A-RSP is a compression set packer with hydraulic hold down that is provide additional dependability even in rough service conditions. The Hydraulically actuated upper dies, ensure that the packer does not move up during operation It is ideally suited for any acid stimulation, cement squeeze
Retrievable Squeeze packer Read More »