Flow Control Equipment

Equalizing Check Valve DESCRIPTION A-ECV, A-357 – Equalizing Check Valve The Equalizing Check Valves are complete equipment units, without any Locking Device. They are utilized in the following Tubing Mounted Equipment: With a C-1 Running Tool Standing Valves are run into a landing Nipple Profile both selective and No-Go type and hold pressure from above […]

B Shifting Tool DESCRIPTION A-BST, A-175 – B Shifting Tool The B Shifting Tool is designed to selectively locate and shift most sliding sleeves. This is accomplished by the Shifting Tool keys engaging the sliding sleeve insert and depending on the direction the tool is run, up or down, the sleeve is shifted. The B

Sliding Sleeve DESCRIPTION A-NESS, A-017 – Non-Elastomeric Sliding Sleeve Shift Down to Open A-NESS-U, A-303 – Non-Elastomeric Sliding Sleeve Shift Up to Open The A-NESS is a non-elastomeric Sliding Sleeve. These are sub surface flow control devices, run on the production tubing, mechanically shifted using standard slickline methods. Intended to control the flow between the

SB Pulling Tool DESCRIPTION A-SB, A-189 – SB Pulling Tool   SB Pulling Tool is designed to engage external fishing necks on subsurface devices within the wellbore. The pulling tools are available with different core lengths, sized to accommodate the different reach lengths on industry standard fishing necks.   The pulling tools are categorized for

R Running Tool DESCRIPTION A-RRT, A-203 – R Running Tool R Running Tool. It is used to run. The fishing neck is connected to the device to improve the industry standard connections. R Running Tool is used to deploy flow control devices e.g. R and RN lock mandrels by locating and set in respective selective

X Line Running Tool DESCRIPTION A-XLR, A-190 – X Line Running Tool X Running Tool is used to deploy the flow of subsurface control devices. It is used to run X and XN lock mandrels in respective Landing Nipples. The fishing neck is connected to the device to improve the industry standard connections. Download Pdf

GS Pulling Tool DESCRIPTION A-GS, A-180 – GS Pulling Tool   The GS Pulling Tool is a basic wireline device which connects a wireline tool string to a wireline retrievable flow control device that is to be run into or retrieved from a well. The GS Running/Pulling Tool is designed to engage an internal type

Landing Nipple DESCRIPTION A-FLN, A-103 – F Landing Nipple A-RLN, A-104 – R Landing Nipple The Landing Nipples are run on the tubing string to provide a seating location for subsurface flow control equipment. The internal F and R profiles make them universal. The R Landing Nipples are equipped with a bottom No-Go as per

Equalizing Prong Assembly DESCRIPTION The Equalizing Prong Assembly, when attached to a Lock mandrel assembly, converts the lock mandrel to a blanking plug, with equalizing device, capable of holding pressure differentials from above or below. Equalizing Sub-Assemblies and a variety of sub-surface flow control devices may be attached to lock mandrel before running in based

Landing Nipples & Lock Mandrels Lock mandrel with X profile Lock mandrel with XN profile Lock mandrel with R profile Lock mandrel with RN profile Landing Nipple with X profile Landing Nipple with XN profile Landing Nipple with R profile Landing Nipple with RN profile DESCRIPTION A-LNX, A-184 – Landing Nipple with X profile          A-LMX,