Pulling Tool for Retrievable Seal Bore Packer DESCRIPTION A-PTRSB, A-229 – Pulling Tool for Retrievable Seal Bore Packer The A-PTRSB is designed to retrieve the A-RSBP Seal Bore Packers from wellbores. The tool latches with the top of the packer and an upward force shears an inner sleeve, continued up-strain spaces out the external components, […]
Pulling Tool for Retrievable Seal Bore Packer Read More »
Hydraulic Setting Tool DESCRIPTION A-HST, A-153– Hydraulic Setting Tool The A-HST, Hydraulic Setting tool, is a Hydraulically actuated tool, that is used to set Packers, Bridge Plugs and Cement Retainers. The tool can be connected to a Wireline Adapter Kit, which can be used to set wireline equipment. It features multiple pistons, which can be
Hydraulic Setting Tool Read More »
Seal stacks Standard Seal Stacks made up of nitrile chevron seals and steel spacer rings. Bonded Seal Stack Two nitrile or Viton seals are bonded to each metal insert. These inserts are separated by steel spacers. Bonded seals should be used when seals cannot be prevented from moving out of the seal-bore while holding differential
Anchor Tubing Seal Assembly DESCRIPTION A-ATSA, A-195 – Anchor Tubing Seal Assembly The A-ATSA is designed to be used with the Seal Bore Packer. It features a ratch-latch Locking mechanism that withstand the forces caused due to pressure differentials. The ATSA can be released by right-hand rotation. Once the Seal Assembly is positioned in the
Anchor Tubing Seal Assembly Read More »
Locator Tuning Seal Assembly DESCRIPTION A-LTSA, A-196 – Locator Tuning Seal Assembly Locator Tubing Seal Assembly is used to tie back an existing production seal bore packer to a location higher up in the wellbore, or to the surface. The Assembly features seals that are compatible with the seal bore and can be provided in
Locator Tuning Seal Assembly Read More »
Mill Out Extension DESCRIPTION A-MOE, A-169 – Mill Out Extension The A-MOE, provides a means for extending the bore of a Seal Bore packer, so as to accommodate the Packer Milling Tool. A mill-out extension runs below a seal bore extension of seal bore packers. The mill-out extension catches sleeve of the packer milling
Mill Out Extension Read More »
Seal Bore Extension DESCRIPTION A-SBE, A-168 – Seal Bore Extension The A-SBE, A Seal Bore Extension is run to provide additional sealing bore when a long seal assembly is run to accommodate considerable tubing movement. The Seal Bore Extension has the same ID as the corresponding packer seal bore it is run with, thus all
Seal Bore Extension Read More »
Permanent Seal Bore Packer DESCRIPTION A-PSP, A-263 – Permanent Seal Bore Packer Permanent Seal Bole high-performance and versatile retainer production packers are considered industry standards among permanent production packers, designed to withstand high differential pressure while the seal assembly is latched into the packers. The packer run with the adapter kit (wireline/hydraulic) and wireline pressure
Permanent Seal Bore Packer Read More »
Hydraulic Set Permanent, Seal Bore Packer DESCRIPTION A-HPSP, A-193 – Hydraulic Set Permanent, Seal Bore Packer The A-HPSP Hydraulic Set Permanent Seal Bole Packer is a hydro-Set Retainer Production designed to withstand high full differential pressure while the seal assembly is latched into the packer. Packer runs and set on a single trip with the
Hydraulic Set Permanent, Seal Bore Packer Read More »
Permanent Hydraulic Set Isolation Packer DESCRIPTION A-PHIP, A-294 – Permanent Hydraulic Set Isolation Packer The A-PHIP Permanent Hydraulic Set Isolation Packer is a Retainer production packer designed to withstand high differential pressure, runs and set on a single trip with the completion tubing string and incorporates maximum strength, uniformity of setting pressure and standardization of
Permanent Hydraulic Set Isolation Packer Read More »
Storm Valve – Plug Type DESCRIPTION A-SV1, A-188 – Storm Valve – Plug Type The A-SV1 is run above a compression set packer and provides a means of disconnecting the drill pipe or tubing close to the surface without tripping the entire string. It is especially useful in cased where the rig must be abandoned
Storm Valve – Plug Type Read More »
Safety Joint for Squeeze Packers DESCRIPTION A-SJSP, A-101 –Safety Joint for Squeeze Packers The A-SJSP Safety Joint is a means for backing off a work string from tools below. Right-hand rotation and reciprocation are needed to back off the release mechanism. Shear screws hold the mandrel locked until a straight pull shears the screws. This
Safety Joint for Squeeze Packers Read More »
Unloader Sub used with Service Packers DESCRIPTION A-USSP, A-102 – Unloader Sub used with Service Packers The A-USSP is designed to be used in conjunction with Service Packers and to withstand high pressures and severe operating conditions. The unloader provides a means to equalize the tubing and annulus during retrieval of service packers, it also
Unloader Sub used with Service Packers Read More »
Retrievable Squeeze packer DESCRIPTION A-RSP, A-100 – Retrievable Squeeze packer A-RSP is a compression set packer with hydraulic hold down that is provide additional dependability even in rough service conditions. The Hydraulically actuated upper dies, ensure that the packer does not move up during operation It is ideally suited for any acid stimulation, cement squeeze
Retrievable Squeeze packer Read More »
Retrievable Seal Bore Packer DESCRIPTION A-RSBP, A-200 – Retrievable Seal Bore Packer The A-RSPB is a single or dual trip Hydraulic Set Retrievable Packer designed to withstand high full differential pressure while the seal assembly is latched into the packer. The Packer is equipped with Bi-directional slips and cones which ensure effective pressure induced force
Retrievable Seal Bore Packer Read More »
Tension Set Retrievable Packer DESCRIPTION A-MR5, A-242 – Tension Set Retrievable Packer The A-MR5, is a single grip tension set retrievable packer, designed for shallow wells. It is simple and easy to use, set by quarter RH turn at the tool and application of tension to pack-off the rubber element. Primarily used in waterflood applications,
Tension Set Retrievable Packer Read More »
Mechanical Retrievable Packer for Tension, Compression and Neutral condition DESCRIPTION A-TCN, A-165 – Mechanical Retrievable Packer for Tension, Compression and Neutral condition The A-TCN is a retrievable production packer that is set mechanically. The J-design that the Packer is equipped with, allows the packer to continue performing in Tension, Compression and Neutral conditions, without the
Mechanical Retrievable Packer for Tension, Compression and Neutral condition Read More »
Mechanical set Double Grip Retrievable Packer DESCRIPTION A-MR3, A-151 – Mechanical set Double Grip Retrievable Packer The A-MR3 is a Mechanical set retrievable packer holds pressure from above and below. The Packer is set by application of quarter turn rotation, followed by slacking off weight onto the packer. Simple quarter turn setting mechanism, allows for
Mechanical set Double Grip Retrievable Packer Read More »
On-Off Seal Assembly DESCRIPTION A-OOSA, A-093 – On-Off Seal Assembly The On-Off Seal Assembly is a Left hand release tubing disconnect device. It features internal landing nipple profiles (F, X, R) to lock flow control equipment. Also features premium seals that can hold high pressure differentials and allow for multiple connect and disconnect cycles. FEATURES
On-Off Seal Assembly Read More »
Extra Large Bore Hydraulic Set, Retrievable Packer DESCRIPTION A-XHRP, A-166 – Extra Large Bore Hydraulic Set, Retrievable Packer The A-XHRP is a Hydraulically set, retrievable production packer. Designed specifically to have an Extra-Large ID for high producing wells. Its compact design allows for the packer to be deployed in vertical as well as deviated applications,
Extra Large Bore Hydraulic Set, Retrievable Packer Read More »