TOP DRIVE CEMENTING HEAD DESCRIPTION A-TDCH, A-079 – Top Drive Cementing Head The Top Drive Cementing Head is designed specifically for cementing liners when a top drive system is employed on the drilling rig. The manifold consists of a swivel, plug drop assembly, ball drop assembly, plug indicator sub and a fluid bypass manifold. The […]
A-TDCH TOP DRIVE CEMENTING HEAD Read More »
Hydraulic Retrievable Packer-High Pressure DESCRIPTION A-OHP, A-269 – Hydraulic set Open Hole Packer The A-OPH is a hydraulic set, single string Open Hole Packer, particularly useful in multizone well stimulation operations. Tubing pressure is used to set the packer and the setting force is locked in by means of a lock ring. The Packing Element
Hydraulic set Open Hole Packer Read More »
Dual Plug System DESCRIPTION A-DW-DP, A-228-Drill Pipe Wiper Plug- Dual Plug System A-LWDP, A-226-Liner Wiper Plug- Dual Plug System The Drill Pipe Wiper Plug (DW-DP) and Liner Wiper Plug (LW-DP) are Dual Plug-Collet Release surface deployed Plugs used to isolate cement from the displacement fluids during cementing operations. The LW-DP are compatible with the Liner
Cut to Release Hydraulic Set Packer DESCRIPTION A-HRP9, A-438 – Cut to Release Hydraulic Set Packer This premium cut to release production packer is a hydraulically set, double grip retrievable packer for use in vertical and deviated wells. The standard version is suitable for high-pressure, high temperature environments, also available for low-temperature use in subsea
Cut to Release Hydraulic Set Packer Read More »
Hydraulic Retrievable Packer-Feed Thru DESCRIPTION A-HRP3-FT, A-248 – Hydraulic Retrievable Packer-Feed Thru The A-HRP3-FT packer is available either straight pull shear or cut to release configuration, with multiple control line bypass intended to be the uppermost packer in intelligent well completions where zonal isolation with line bypass is typically a requirement. The packer provides
Hydraulic Retrievable Packer-Feed Thru Read More »
Junk Basket for Debris DESCRIPTION A-JB, A-217 – Junk Basket for Debris The A-JB Junk/Boot basket provides an easy and effective way to trap heavy cuttings during milling operations. The cuttings will fall out of the drilling fluid into the boot due to a reduction in annular velocity when the drilling fluid circulates across a
Junk Basket for Debris Read More »
Float Collar & Shoes DESCRIPTION A-CFC, A-058 Cement Float Collar A-CFS, A-057 Cement Float Shoe AVENTUS offers a wide range and variations of dependable Floating Equipment for application in various geologies and operating requirements. Float Equipment are equipped with various valve (s) and insert (s) as per the application. Large flow area for higher flow
Mechanical Stage Cementing Collar DESCRIPTION A-SSC-M A-310 – Mechanical Stage Cementing Collar The SSC is used for carrying our stage cementing applications where the good design or pump capacities prevent cementing in a single stage. It features two internal sleeves, that can be shifted Mechanically, depending upon the plug configuration used, to open the cementing
Mechanical Stage Cementing Collar Read More »
Hydraulic Stage Cementing Collar DESCRIPTION A-SSC-H A-310 – Hydraulic Stage Cementing Collar The SSC is used for carrying our stage cementing applications where the good design or pump capacities prevent cementing in a single stage. It features two internal sleeves, that can be shifted Hydraulically, depending upon the plug configuration used, to open the cementing
Hydraulic Stage Cementing Collar Read More »
Reamer Shoe DESCRIPTION A-ENRFS-1,2, A-199 – Reamer Shoe w/ Eccentric Aluminum Nose AVENTUS Reamer shoes offer dependable performance for all classes’ oil and gas wells. The valves prevent cement backflow, provide casing buoyancy during run-in, and act as internal BOPs during the process of running and cementing the casing. The Shoe has reaming capability through
Float Collar & Shoes DESCRIPTION A-CFC, A-058 Cement Float Collar A-CFS, A-057 Cement Float Shoe AVENTUS offers a wide range and variations of dependable Floating Equipment for application in various geologies and operating requirements. Float Equipment are equipped with various valve (s) and insert (s) as per the application. Large flow area for higher flow
Equalizing Check Valve DESCRIPTION A-ECV, A-357 – Equalizing Check Valve The Equalizing Check Valves are complete equipment units, without any Locking Device. They are utilized in the following Tubing Mounted Equipment: With a C-1 Running Tool Standing Valves are run into a landing Nipple Profile both selective and No-Go type and hold pressure from above
Equalizing Check Valve Read More »
B Shifting Tool DESCRIPTION A-BST, A-175 – B Shifting Tool The B Shifting Tool is designed to selectively locate and shift most sliding sleeves. This is accomplished by the Shifting Tool keys engaging the sliding sleeve insert and depending on the direction the tool is run, up or down, the sleeve is shifted. The B
Sliding Sleeve DESCRIPTION A-NESS, A-017 – Non-Elastomeric Sliding Sleeve Shift Down to Open A-NESS-U, A-303 – Non-Elastomeric Sliding Sleeve Shift Up to Open The A-NESS is a non-elastomeric Sliding Sleeve. These are sub surface flow control devices, run on the production tubing, mechanically shifted using standard slickline methods. Intended to control the flow between the
SB Pulling Tool DESCRIPTION A-SB, A-189 – SB Pulling Tool SB Pulling Tool is designed to engage external fishing necks on subsurface devices within the wellbore. The pulling tools are available with different core lengths, sized to accommodate the different reach lengths on industry standard fishing necks. The pulling tools are categorized for
R Running Tool DESCRIPTION A-RRT, A-203 – R Running Tool R Running Tool. It is used to run. The fishing neck is connected to the device to improve the industry standard connections. R Running Tool is used to deploy flow control devices e.g. R and RN lock mandrels by locating and set in respective selective
X Line Running Tool DESCRIPTION A-XLR, A-190 – X Line Running Tool X Running Tool is used to deploy the flow of subsurface control devices. It is used to run X and XN lock mandrels in respective Landing Nipples. The fishing neck is connected to the device to improve the industry standard connections. Download Pdf
X Line Running Tool Read More »
GS Pulling Tool DESCRIPTION A-GS, A-180 – GS Pulling Tool The GS Pulling Tool is a basic wireline device which connects a wireline tool string to a wireline retrievable flow control device that is to be run into or retrieved from a well. The GS Running/Pulling Tool is designed to engage an internal type
Landing Nipple DESCRIPTION A-FLN, A-103 – F Landing Nipple A-RLN, A-104 – R Landing Nipple The Landing Nipples are run on the tubing string to provide a seating location for subsurface flow control equipment. The internal F and R profiles make them universal. The R Landing Nipples are equipped with a bottom No-Go as per
Equalizing Prong Assembly DESCRIPTION The Equalizing Prong Assembly, when attached to a Lock mandrel assembly, converts the lock mandrel to a blanking plug, with equalizing device, capable of holding pressure differentials from above or below. Equalizing Sub-Assemblies and a variety of sub-surface flow control devices may be attached to lock mandrel before running in based
Equalizing Prong Assembly Read More »